Matsushita Electric Works Fire & Security Technology AB
MEW00442
Rev: -
Operating Instructions EBL512, V1.44.x
34
15.4
Key cabinet alarm reset
Key cabinet alarm is reset the same way as a fire alarm, see above. To
inform the user that the key cabinet has been opened, a fault message
is shown in the display as follows:
This key cabinet fault message is to be acknowledged the same way as
a "normal" fault, see chapter "Fault acknowledge", page 47.
When the key cabinet fault is acknowledged, the LED "Fault" (L8)
will be turned OFF (if the key cabinet is closed and if there are no
other faults in the system).
15.5
Zone/Detector not reset
Normally used only in Swedish config. / convention.
LED "Zone/Detector not reset" is lit, indicating that one or more alarm
points have been reset while still in alarm status, i.e. it is non-reset
("isolated") and has to be re-enabled via menu H2/B7.
NOTE! Zone/Detector not reset = Encapsulated.
FAULT: Key box, control unit: No.
Date: MM-DD Time: HH:MM
