Matsushita Electric Works Fire & Security Technology AB
MEW00442
Rev: -
Operating Instructions EBL512, V1.44.x
70
25
Set calendar and clock (H3)
The RTC component has a built-in battery. Normally, date, day of the
week and time don't have to be set, except when the control unit is
powered for the first time. The clock may have to be corrected, so
that the "time stamps" for fire alarms, faults, etc. will be correct.
In this menu is also the SW (system program) version shown.
NOTE! If you only want to see the SW version,
push
"Return"
(instead of "A") to return to menu H3, because then there will be no
changes of the time.
Action
Text in display
Comments
"Access"
According to chapter
"Access", see page 57.
Scroll to menu H3.
Set calendar and clock
ACCEPT? H3
"A"
Date: YY-MM-DD Time: hh:mm:ss
Weekday:W (1=M, 7=S) VER:vvvvvvvvvvvvv
Here is the SW version
shown (e.g. VER: 1.41.x).
The time shown, is the
time when "A" was pushed
(for menu H3).
Push "A" to accept or
change the date, time
and/or weekday. The
"clock" starts from the
date, time, etc. shown in
the display.
NOTE! Push "Return"
(instead of "A") when no
changes are to be done.
"A"
or
"Return"
Set calendar and clock
ACCEPT? H3
Scroll or push "Return" to
logout.
