Matsushita Electric Works Fire & Security Technology AB
MEW00442
Rev: -
Operating Instructions EBL512, V1.44.x
11
3.3 Documents
The following documents are available:
•
Planning instructions (incl. drawings)
•
Operating instructions
Normally information that is found in one document is not to be found
in another document, i.e. the documents complements each other.
3.4 Applications
The EBL512 system is intended for small, medium and large
installations. The intelligent control units offer the system designer
and end user a technically sophisticated range of facilities and
functions. Programming (PC SW Win512) and commissioning of the
control unit / system is very easy. Start with one control unit and then,
when required, add more units. The TLON network makes it possible
to install the control units in one building or in many buildings.
3.5 PC
SW
Win512
is used for programming and commissioning of one or more
control units:
•
download / backup of site specific data
•
download of SW / settings / configurations / C.U. & system data
•
create and download the user definable text messages shown in
the alphanumeric display in the C.U. / ext. FBP and in the Display
units.
TLON Manager
is used for programming of network data / addresses
/ etc.
NEWTEXT
(DOS based "older" program) could be used to create /
download the user definable text messages shown in the Display units
connected to the COM loops.
