B A C 5 0 2 5
Model Name: Rockhopper-46/62
B A C 5 0 2 5
Model Name: Rockhopper-46/62
Update: Mechanical Parameters
Update: Mechanical Parameters
This procedure will update the mechanical parameters.
Menu Up
Menu Up
Menu Up
Menu Down
Menu Down
Menu Down
H t o E d g e : 2 5 . 1 8 0 m m
X F t o H :
3 0 . 8 9 0 m m
H t o C u t :
1 5 . 3 9 0 m m
X F t o X R : 1 2 3 . 7 0 0 m m
P a p e r E d g e :
2 8 0 9
R i g h t F l u s h P :
3 6 9 9
L e f t F l u s h P :
2 4 2 4
U p d a t e P a r a m
Use the VALUE + and - keys to change the setting
and press [ENTER] to confirm the change.
Use the VALUE + and - keys to change the setting
and press [ENTER] to confirm the change.
Use the VALUE + and - keys to change the setting
and press [ENTER] to confirm the change.
Use the VALUE + and - keys to change the setting
and press [ENTER] to confirm the change.
Use the VALUE + and - keys to change the setting
and press [ENTER] to confirm the change.
Use the VALUE + and - keys to change the setting
and press [ENTER] to confirm the change.
Use the VALUE + and - keys to change the setting
and press [ENTER] to confirm the change.
A n o t h e r L F P :
3 8 7 0 0
P a r a m U p d a t e ?
P a p e r W i d A d j :
- 5
A n o t h e r R F P :
4 0 0 0 0
Use the VALUE + and - keys to change the setting
and press [ENTER] to confirm the change.
Use the VALUE + and - keys to change the setting
and press [ENTER] to confirm the change.
Use the VALUE + and - keys to change the setting
and press [ENTER] to confirm the change.
After this display, [Menu Down] will appear
If there is a change, a confirmation message will appear
when you press [ENTER]
The update message will appear when you press [ENTER]
UPDATE: Mech Param
If [Back] was pressed, a message that the parameter is not updated will appear and
the display will move to “UPDATE: Mech Param”.
Menu Up
Menu Down
Menu Up
Menu Down
Menu Up
Menu Down
Menu Up
Menu Down
Menu Up
Menu Down
Menu Up
Menu Down
