R E P 1 3 9 2
Model Name: Rockhopper-46/62
R E P 1 3 9 2
Model Name: Rockhopper-46/62
How to replace the Head and Head Cable
How to replace the Head and Head Cable
Item
Replacement and Adjustment Procedure
3. Adjustment and
Examination
Procedure
2.
Load roll media in the printer.
3.
Do a "Nozzle check" to confirm whether there is incomplete filling or abnormal ejection.
If there is a fault, try again after "Cleaning".
« REFERENCE »
At rare intervals a dirty wiper may cause faulty ejection and the wiper should be rubbed with a wiper cleaning cloth.
4.
Do “Left Tilt” adjustment.
5.
Do “Right Tilt” adjustment.
6.
Do “Repeatability (Normal)” adjustment.
7.
Do “Repeatability (Microdot)” adjustment.
8.
Do "Unidirectional" adjustment.
9.
Do "Unidirectional (Microdot)" adjustment.
10. Do "Test print" to confirm results of adjustments.
« REFERENCE »
If a head has been replaced, the nozzle ejection count value should be reset.
1.
Carry out initial filling with ink.
« REFERENCE »
Head washing and initial filling consumes a large quantity of waste liquid.
The waste liquid box should be replaced when initial filling is finished.
CAUTION: After initial filling, wait for at least 30 minutes before printing.
Otherwise the printing quality cannot be assumed.
