E X A 1 0 1 0
Model Name: Rockhopper-46/62
E X A 1 0 1 0
Model Name: Rockhopper-46/62
Printer Status Messages
When Message is Displayed
1
• Undefined Media
This message means that when
media was mounted, it was not able
to be recognized.
1-1
1-2
1-3
1-4
1-5
1-6
1-7
1-8
• Is the edge sensor assembly cable that is attached to the head unit securely connected?
→
Connect it securely to connector J204 (P EDGE) on the head board assembly.
• Is the XR cable assembly (paper sensor R) cable that is attached below paper guide R
securely connected?
→
Connect it securely to connector J107 (XR) on the main board assembly.
• Use the printer's self-diagnostic “Sensor: Edge” to confirm the amount of sensor reflec-
tion. Using thick coated paper, check whether the paper detection value is within 0090 to
00a4.
→
Replace edge sensor assembly.
→
Adjust with the head board assembly variable resistor (VR1).
• Check Y cable contacts. Check that they are not inserted obliquely.
→
Reconnect main board assembly connector J111 (HEAD1) and head board assembly
connector J201 (MAIN1).
• The head board assembly may be damaged.
→
Replace it.
• Check with the self-diagnostic “Sensor: X Rear” whether the sensor is operating.
→
Replace paper sensor R if “Paper End” is displayed when media is mounted.
• The main board assembly may be damaged.
→
Replace it.
• The Y cable assembly may be damaged
→
Replace it.
No.
Symptom
Sequence
Items to be Confirmed
When Message is Displayed
Printer Status Messages
1410
1200
1410
1420
1200
1140
1360
1040
1040
R E P
B A C
G O T O R e f . P a g e s
