E X A 1 0 3 0
Model Name: Rockhopper-46/62
E X A 1 0 3 0
Model Name: Rockhopper-46/62
Printer Status Messages
When Message is Displayed
1
• [User 1] Media End
This message is displayed when no
media is mounted or printing in cut
media mode has been completed.
1-1
1-2
1-3
1-4
1-5
1-6
1-7
• Is the edge sensor assembly cable that is attached to the head unit securely connected?
→
Connect it securely to connector J204 (P EDGE) on the head board assembly.
• Is the XR cable assembly (paper sensor R) cable that is attached below the rear paper
guide securely connected?
→
Connect it securely to connector J107 (XR) on the main board assembly.
• Use the printer's self-diagnostic “Sensor: Edge” to confirm the amount of sensor reflec-
tion.
Using thick coated paper, check whether the paper detection value is within 0090 to
00a4.
→
Replace edge sensor assembly.
• The head board assembly may be damaged.
→
Replace it.
• Check with the printer's self-diagnostic "Sensor: X Rear" whether the sensor is operating.
→
Replace paper sensor R if “Paper End” is displayed when media is mounted.
• The main board assembly may be damaged.
→
Replace it.
• The Y cable assembly may be damaged.
→
Replace it.
No.
Symptom
Sequence
Items to be Confirmed
When Message is Displayed
Printer Status Messages
1410
1200
1410
1420
1200
1140
1360
1040
1040
R E P
B A C
G O T O R e f . P a g e s
