Muratec MFX-C4000 Field Engineering Manual Download

Page: 69 / 280

Maintenance and Disassembly

Service Manual

3-7

12. Turn the imaging unit locking levers inwards

until it locks in place and close the inner cover.

13. Insert the waste toner container into position

and then push it to make sure that it is firmly

seated in place.

14. Close the front cover, then the side cover.

15. Make sure that the cover is securely latched

and then turn the machine on.

3.1.4.3 Replacing the waste toner container

1. Turn the machine off, then wait a few minutes for

the machine to cool.

2. Open the side cover.

3. Open the front cover.

4. Pull the waste toner container out of the machine

using its handle.

Summary of Contents for MFX-C4000

























































































































































































































































































Search results

Summary of Contents for MFX-C4000

Reviews:

Related manuals for MFX-C4000

Brands by name

Popular brands

Muratec MFX-C4000, Field Engineering Manual

Search results

Summary of Contents for MFX-C4000

Reviews:

Related manuals for MFX-C4000

Brands by name

Popular brands