Muratec MFX-C4000 Field Engineering Manual Download

Page: 110 / 280

Alignment & Troubleshooting

Service Manual

4-4

4.1.2.1 Tips for avoiding paper jams

By selecting the correct media types, most paper jams can be avoided.

• Ensure that the adjustable guides are positioned correctly.

• Do not overload the tray. Ensure that the paper level is below the paper capacity mark on the inside of the

tray.

• Do not remove paper from the tray while your machine is printing.

• Flex, fan, and straighten paper before loading.

• Do not use creased, damp, or highly curled paper.

• Do not mix paper types in a tray.

• Use only recommended print media.

• Ensure that the recommended side of the print media is facing up in the tray, or facing down in the multi-

purpose tray.

• If paper jams occur frequently when you print on A5/B5-sized paper: Load the paper into the tray with the

long edge facing the front of the tray. If load the paper this way, printing both sides of the paper (Duplex) is
not supported.

Summary of Contents for MFX-C4000

























































































































































































































































































Search results

Summary of Contents for MFX-C4000

Reviews:

Related manuals for MFX-C4000

Brands by name

Popular brands

Muratec MFX-C4000, Field Engineering Manual

Search results

Summary of Contents for MFX-C4000

Reviews:

Related manuals for MFX-C4000

Brands by name

Popular brands