Muratec MFX-C4000 Field Engineering Manual Download

Page: 115 / 280

Alignment & Troubleshooting

Service Manual

4-9

In the optional tray

1. Open the outer cover in tray 2.

2. Open the inner cover of tray 2.

3. Pull the jammed paper out in the direction

shown. To avoid tearing the paper, pull it out
gently and slowly.

If the paper does not move when you pull, or if
you do not see any paper in this area, stop and
go to step 4.

4. Lift the front part of the tray slightly up to release

the tray from the machine.

If the paper does not move when you pull, or if
you do not see the paper in this area, stop and
go to step 3.

5. Remove the paper in the direction shown. To

avoid tearing the paper, pull it out gently and
slowly.

6. Insert the paper tray and close the two covers.

Summary of Contents for MFX-C4000

























































































































































































































































































Search results

Summary of Contents for MFX-C4000

Reviews:

Related manuals for MFX-C4000

Brands by name

Popular brands

Muratec MFX-C4000, Field Engineering Manual

Search results

Summary of Contents for MFX-C4000

Reviews:

Related manuals for MFX-C4000

Brands by name

Popular brands