Muratec MFX-C4000 Field Engineering Manual Download

Page: 116 / 280

Alignment & Troubleshooting

Service Manual

4-10

In the optional high capacity feeder

1. Open the outer cover of the high capacity feeder.

2. Open the inner cover of the high capacity feeder.

3. Pull the jammed paper out, in the direction

shown, pulling gently and slowly in order to avoid
tearing the paper.

If the paper does not move when you pull, or if
you do not see any paper in this area, stop and
go to step 4.

4. Pull out the optional high capacity feeder.

5. Lift the front part of the tray slightly up to release

the tray from the machine.

Summary of Contents for MFX-C4000

























































































































































































































































































Search results

Summary of Contents for MFX-C4000

Reviews:

Related manuals for MFX-C4000

Brands by name

Popular brands

Muratec MFX-C4000, Field Engineering Manual

Search results

Summary of Contents for MFX-C4000

Reviews:

Related manuals for MFX-C4000

Brands by name

Popular brands