3-29
Using the Admin Tools
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
Using the
Admin
T
ools
Management Information
Device Settings
Registering device information
Registers specific device information to distinguish machines when multiple
units have been installed.
1
Log-in to OfficeBridge.
NOTE:
If the administrator is registered, you should log-in as an administrator to
edit this setting.
2
Click [Device Settings] on the “Admin Tools” tab.
The “Device Settings” screen will appear.
Item
Description
“Device Name”
Enter the name of the main unit in order to identify
the device. The name may contain up to 40 charac-
ters.
“Installation Loca-
tion”
Enter the location where the main unit is installed,
the department where it is used (managed), etc.
The location may contain up to 100 characters.
“System Options”
You may add options that have been installed, the
configuration of these devices, etc.
This may contain up to 200 characters.
“Network Connec-
tion”
The current network communications speed and
communications method are displayed.
“Telephone Line
Status”
The current telephone line status is displayed.
