SW
33
Innovation. Quality. Performance. Best in Industry. Worldwide.
6.
Edit
allows the operator to edit or modify existing M-Code definitions by selecting the M Code of interest
and modifying the information.
7.
Delete
allows the operator to remove an existing M-Code definition by selecting the M Code of interest
and deleting the information.
D. Tool Comp Values
allow operators to preview jobs and can be used instead of flash parameters when
JobPreviewer is run without a controller or without MotionMechanic being installed. Tool Comp Values
match the parameters of the job file. Each tool has its own tool compensation distance, and up to 10 values
can be set to compensate for the tool width when cuts are being made.
HPGL Configuration
The HPGL Configuration screen is set up for inches with a resolution setting of 1016. This configures the
controller for a 1” to 1” scale. Operators using metric units should set the resolution to 40.
The resolution should be checked when the part size is different from the programmed part size. The white box to
the right of the settings provides additional information and help for whichever function is selected.
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
