MI
60
Innovation. Quality. Performance. Best in Industry. Worldwide.
3. Press
X-axis Jog Arrows
until the particular job file to be saved to the controller is highlighted in
blue.
4. Press
Enter
to accept the job file.
5. Press
Start
to save the file to the controller. The operator can access the file from the
DNC
function
at the keypad.
6. Press
Cancel
to return to the Utility sub-menu.
7. Press
DNC
to access the files available from the controller.
8. Press
X-axis Jog Arrows
until the particular job file to be run is highlighted in blue.
9. Press
Enter
to access the job file and then
Start
to execute the job file.
Deleting Files from Controller DNC
1. Make sure the DNC mode is set for local.
2. Press
DNC
to access the list of job files available in the controller.
3. Press
X-axis Jog Arrows
until the particular job file to be deleted from the controller is highlighted
in blue.
4. Press
Enter
to access the job file.
5. Press
Material Library
to set the system to delete the job file.
6. Press
Enter
to delete the job file.
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
