MI
8
Innovation. Quality. Performance. Best in Industry. Worldwide.
Lift Height
The Lift Height function is used to set the distance the tool will rise above the surface of the material between cuts
and is only applicable for controller functions, such as Go Home and Matl_Cut, as well as G-Code programs and
HPGL programs with no Lift Height included.
The Lift Height allows the tool to travel above and across the material and can be modified after the surface is set.
The Go Home function will move the Z-axis to the new Lift Height position.
1. Press
Menu
to access the menu system.
2. Press
X-axis Jog Arrows
until Params_2D is highlighted in blue.
3. Press
Enter
to access the Params_2D sub-menu.
4. Press
X-axis Jog Arrows
until Lift Height is highlighted in blue.
5. Press
Enter
to adjust the Lift Height.
6. Enter the Lift Height using the number keypad (e.g., 0.500).
7. Press
Enter
to record the Lift Height value. The number entered should be a positive number, but the
display will show it as a negative number since movement up from the surface is considered negative while
movement down from the surface is considered positive.
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
