CN
8
Innovation. Quality. Performance. Best in Industry. Worldwide.
Setup for Ethernet Connection
The Ethernet communication is set up through the Machine Tool Properties applet. Operators should make sure
that the CNC machine is on and connected to the computer via an Ethernet connection before attempting to
automatically install the Ethernet connection. The following directions assume that the operator has complied
with all hardware requirements for Ethernet connections (see
Ethernet Connection Information
1. Right-click on the Machine Connections icon in the toolbar and select Connection Manager.
At the initial setup, the Connection Manager dialog should show an unassigned machine.
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
