MI
31
Innovation. Quality. Performance. Best in Industry. Worldwide.
Start Z Surface Mapping
The Start Z Surface Mapping function is used to map the surface of the material based on the step size, Z seek
speed, and other values set in the surface map screen so that the system can familiarize itself with the various
depressions and ridges of the material.
1. Press
Menu
to access the menu system.
2. Press
X-axis Jog Arrows
until SurfMap is highlighted in blue.
3. Press
Enter
to access the SurfMap sub-menu.
4. Press
X-axis Jog Arrows
until Start Z Surf Mapping is highlighted in blue.
5. Press
Enter
to access the Z surface map function.
6. Press
Jog Arrows
to place the head assembly at the area to be mapped.
7. Press
Enter
to begin mapping. The system will scan the area.
8. Press
Z-axis Jog Arrows
to Jog to the surface.
9. Press
Enter
to begin mapping the surface. The system will Jog to the surface several times and in several
places, prompting the operator to press
Enter
between scans. Once the surface has been mapped, the
display will return to the SurfMap sub-menu.
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
