KF
32
Innovation. Quality. Performance. Best in Industry. Worldwide.
Bar Code Scanner
The
MultiCam
Bar Code Scanning Interface has been developed to reduce setup time, minimize errors, and
work directly with shop floor work orders. The bar code scanner works in direct conjunction with the
JobPreviewer and DNC. The JobPreviewer is used to produce shop floor work orders, which are automatically
assigned unique bar code identifications. Once the operator scans the bar code, DNC will automatically call up the
correct file and send it to the controller. This saves time and reduces the chance for error.
An excellent tool for communication of special instructions, the work order contains a graphical representation of
the cut file, tool specifications, material descriptions, and user notes. The bar code label on the work order ensures
that the correct job is accessed.
Safety Mat
The Safety Mat is a pressure-sensitive foot mat that will cause the machine to enter into Pause mode when the mat
is stepped on during machine operations. This Pause mode can only be cleared by pressing the “Safety Mat Reset”
switch at the operator station and then clearing the error at the keypad.
MultiCam
advises operators to pause operations during any changing of tools or materials and recommends that
operations be paused when any disruptive action (e.g., change of shift, emergency situation) occurs in the cutting
area. All cutting operations should be stopped and the machine turned off before any maintenance issues are
addressed.
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
