SW
22
Innovation. Quality. Performance. Best in Industry. Worldwide.
Material Library Editor
The Material Library stores all the cutting parameters for various materials and thicknesses. These parameters are
divided into several basic types of material. Under each type of material, operators can load various thicknesses
and can attach cutting attributes (e.g., feedrate, power, cut height) to each type of thickness and material. The
Material Library Editor in Suite4 allows the operator to manipulate the material library in order to add or remove
a particular material or material thickness from the stored information on each machine. The following directions
address how operators may add a material to an existing material library on a machine.
1. Leave the keypad at the home screen. Operators should
never change any material information from the
keypad while the Material Library Editor is open on the computer
. Making changes at this time could
delete the material library file from the controller.
2. Select Machine Tools >> Material Library Editor. From this screen, operators can add, edit, or delete material
library information from the Material Library Editor program.
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
