MI
78
Innovation. Quality. Performance. Best in Industry. Worldwide.
3. Set the Pen 1 parameters from the Params_2D menu to burn through the white paper without burning the
spoilboard. The
suggested settings
are shown below; actual settings may vary between machines.
Parameter Value
X,Y Feedrate
60
Power 30
Cut Height
0.1
Pierce Pressure
20
Cut Pressure
20
Pierce Power
10
Pierce Time
0
4. Set Home at the center of the white paper.
a. Press
Jog Arrows
to place the
center of the head assembly
over the white paper.
b. Press
Set Home
.
c. Press
Enter
to accept
.
This will store the absolute X and Y coordinate locations in the controller’s
memory.
5. Set the Camera Offset.
a. Press
Menu
to access the menu system.
b. Press
X-axis Jog Arrows
until Vision is highlighted in blue.
c. Press
Enter
to access the Vision sub-menu.
d. Press
X-axis Jog Arrows
until Set Camera Offsets is highlighted in blue.
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
