KF
14
Innovation. Quality. Performance. Best in Industry. Worldwide.
Shift
Pressing
Shift
before pressing any desired Hot Key will allow the operator to toggle between
Normal Hot
Key
and
Shifted Hot Key
functions.
When
Shift
has been pressed, the Shift LED will illuminate to indicate that the keypad is now in
Shifted
Mode
.
DNC
The Distributed Numerical Control (DNC) function allows the operator to access files directly from the hard drive
of the host PC by using the keypad at the machine. This allows the computer and the machine to be in different
locations, which frees up the operator to view the progress of the cutting sequence. Additional information on
DNC and JobServer can be found in the Software Section of this manual.
1. Make sure that JobServer
or JobNameServer
has been activated on the computer before selecting
this function.
2. Press
DNC
.
The keypad will display a list of the directories in the DNC path after the system has validated and verified.
3. Press
Jog Arrows
to move the blinking cursor over the directory to be entered.
4. Press
Enter
. The keypad will display the DNC files that are available in that directory, and directories or
folders and any associated subfolders are displayed between brackets [ ]. Press
Enter
while the blinking
cursor is located over the 2 decimal points at the beginning of the directory to return to the list of directories if
necessary.
5. Press
Jog Arrows
to move the blinking cursor over the first letter of the file to be
executed.
Z-axis Jog Arrows
will page up or down one screen at a time, while
X-axis Jog Arrows
will move up or down one line at a time.
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
