SW
23
Innovation. Quality. Performance. Best in Industry. Worldwide.
Saving the Material
1. Right-click on any material and select
Insert Copy
. (Since Material Library Editor copies the attribute
information from the first material, operators should start with an existing material in the material library
that has similar attributes and characteristics to the new material.)
This will automatically open the material attribute folder and request the new node name.
2. Correct the material name to show the new material type (e.g., Acrylic test) and select
OK
. While operators
can enter material types with several characters, the first nine characters will be the only ones visible on the
keypad screen.
3. Double-click on the number shown under Value, correct that number to the next number in the sequence
(e.g., 15), and select
OK
.
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com v. 11 10
