MROTEK PINE-16M, Configuration Manual

Page: 40 / 100

4.9 Configuration of Central Site Switching of PINE-16M
4-24
Example 1
: Set the aging-time to 500 seconds.
Mro-tek#
config terminal
Configuration mode, one conmmand input per time. End with CTRL-Z.
Mro-tek(config)#
mac-address-table aging-time
500
Set Successfully.
Mro-tek(config)#
show mac
aging time 500 seconds.
enabled mac address learning.
current mac address query conditions:
all ports and vlans
dynamic and static addresses
max number for next query : 0
next address must larger than : 0000.0000.0000, vlanid 0, port 0
Mro-tek(config)#
Example 2
: stop the aging of a MAC address
Mro-tek#
config
Configuration mode, one conmmand input per time. End with CTRL-Z.
Mro-tek(config)#
mac-address-table aging-time
0
Set Successfully.
Mro-tek(config)#
show mac
aging time 0 seconds.
enabled mac address learning.
current mac address query conditions:
all ports and vlans
dynamic and static addresses
max number for next query : 0
next address must larger than : 0000.0000.0000, vlanid 0, port 0
Mro-tek(config)#
Configuring Static MAC address
Static MAC address is not exposed to aging. A static MAC address must be a unicast address or a
multicast address. There is no static MAC address entry by default.
Command Description
config
Enter the global configuration mode
mac-address-table static
MACADDRESS
vlan
<1-4094>
port
<1-9>
To configure a static MAC address entry.
show mac-address-table
(all|static|dynamic)
Shows MAC address table. The MAC address table can only
be properly shown when the MAC address table polling is
enabled.