MROTEK PINE-16M, Configuration Manual

Page: 73 / 100

5.3 Configuration of E1 interface on remote inverse multiplexer device
5-5
5.3 Configuration of E1 interface on remote
inverse multiplexer device
5.3.1 Configuring clock mode of E1 interface
Command Description
Config
Enter the global configuration mode
remote
0 <1-16> Enter the remote inverse multiplexer device’s configuration mode.
interface e1
<1-8> Enter the E1 interface configuration mode of remote inverse multiplexer
device.
clock-mode
(master|slave) To define a clock mode (Master / Slave).
show interface
Shows the configuration information.
Example:
Mro-tek#
config
Mro-tek(config)#
remote
0 8
Mro-tek(config-remote/0/8)#
interface e1
1
Mro-tek(config-e1/0/8/1)#
clock-mode
master
Mro-tek(config-e1/0/8/1)#
show interface
5.3.2 Configuring CRC options of E1 interface
Command Description
Config
Enter the global configuration mode.
Remote
0 <1-16> Enter the remote inverse multiplexer device configuration mode.
interface e1
<1-8> Enter the E1 interface configuration mode of remote inverse multiplexer
device
crc-auto
(enable|disable) To Enable / Disable E1 CRC mode
show interface
Shows the configuration information
Example:
Mro-tek#
config
Mro-tek(config)#
remote
0 8
Mro-tek(config-remote/0/8)#
interface e1
1
Mro-tek(config-e1/0/8/1)#
crc-auto
enable
Mro-tek(config-e1/0/8/1)#
show interface