MROTEK PINE-16M, Configuration Manual

Page: 16 / 100

System Command Configuration
3-2
System Command Configuration
Basic system commands and configurations
Clear:
Clears the information on the screen.
List:
Lists all commands of the current mode.
The management of configuration file and startup file
Configuration file
•
Default configuration file of the current system is: “
startup_config.conf
”
•
The configuration file can be written into the flash file system using the command
write
.
During the reboot, the configuration information written in the start-up file will be configured
automatically.
•
User can use the command erase to delete the configuration file.
Program file
•
The core file of the current system is: “
pine-16m
.z”;
•
Program file can be downloaded to the system via FTP/TFTP protocols using the command
download.
•
The version information of the current firmware will be shown using the command show
version.
User management
The default user name of the system is: root
The default password of the system is: root
To add a new user, please follow the steps in the table below:
Command Description
user
USERNAME
password
PASSWORD USERNAME: The user name
PASSWORD: The user password
user
USERNAME
privilege
<1-15> USERNAME: The user name
<1-15>
: the level of user privilege
write
To save the configuration information
show user
To lists the available user profile information