MROTEK PINE-16M, Configuration Manual

Page: 65 / 100

4.11 Central site VCC configuration list of PINE-16M
4-49
4.11 Central site VCC configuration list of PINE-
16M
The network management configuration for PINE-16M is nothing but the network management
configuration for the 16 channels.
4.11.1 Enabling the VCC channel
The command and steps for enabling network management channel (VCC) is shown in the table below.
The network management channel is disabled by default.
Command Description
Config
Enter the global configuration mode.
interface vcc
Enter the central site VCC configuration mode of PINE-
16M.
vcc-channel
enable Enables the VCC channel
show interface
Shows the configuration information
Example:
Mro-tek#
config
Mro-tek(config)#
interface
vcc
Mro-tek(config-vcc)#
vcc-channel
enable
Set Successfully.
Mro-tek(config-vcc)#
show interface
Channel Description IPAddress Netmask Enable
16 192.168.5.28 255.255.255.0 enable
Mro-tek(config-vcc)#
4.11.2 Disable VCC channel
Command Description
config
Enter the global configuration mode
interface vcc
Enter the central site VCC configuration mode of PINE-16M.
vcc-channel disable
Disable the VCC channel
show interface
Shows the configuration information
Example:
Mro-tek#
config
Mro-tek(config)#
interface
vcc