MROTEK PINE-16M, Configuration Manual

Page: 96 / 100

7.1 Example
7-8
LocalLoop = normal
RemoteLoop = normal
CrcAutoNego = enable
Bert = disable
CommunicationMode = disable
AlarmStatus = NONE
ErrorSecond = 0
SeriousErrorSecond = 0
BitErrorRate = 1
EthSendPacketNum = 0
EthReceivePacketNum = 2727487
EthReceiveErrorPacketNum = 11721
RemoteDevId = 1
RemoteE1 = 1
LinkStatus = LinkOK
Mro-tek(config-e1/0/1)#
end
Mro-tek#
write
Are you sure[Y/N]:y
Please wait..Copy OK: 3109 bytes copied
Save current configuration successfully!
Mro-tek#
7. Test the E1 interface
(only one E1 interface is configured in the example, the configuration of every
E1 interface is the same)
Mro-tek#
config
Configuration mode, one command input per time. End with CTRL-Z.
Mro-tek(config)#
interface e1
1
Mro-tek(config-e1/0/1)#
remote-e1-loopback
Set Successfully.
Mro-tek(config-e1/0/1)#
bert
enable
Set Successfully.
Mro-tek(config-e1/0/1)#
show interface
e1 interface information:
slot = 0, portid = 1, ifIndex = 0x20041000
ClockMode = master
FrameMode = framed
Timeslot = 1-31