MROTEK PINE-16M, Configuration Manual

Page: 29 / 100

Configuration of the Ethernet interface of PINE-16M
4-13
4.5.5 Flow control function
Flow control on the direction of transmitting and receiving of the port are configured at the same time, that
is, they can only be opened or closed simultaneously.
By default, the flow control function is enabled.
Command Description
config
Enter the global configuration mode.
interface eth
<1-2> To Select a specific Ethernet interface of PINE-16M.
flow-control (on|off)
To Enable/Disable the flow control function.
show interface
Shows configuration information of the interface.
Example:
Mro-tek#
config
Mro-tek(config)#
interface eth
1
Mro-tek(config-eth/0/1)#
flow-control
on
setup successfully!
Mro-tek(config-eth/0/1)#
4.5.6 Clear the counter
The Counters of Ethernet port counters like input/output broadcast/multicast packets count, discarded
packets and other counters.
Command Description
config
Enter the global configuration mode
interface eth
<1-2> Enter the central site Eth configuration mode of PINE-16M.
clear statistic
Clear the statistic counter
show interface
Show the configuration information of the interface.
Example:
Mro-tek#
config
Mro-tek(config)#
interface eth
1
Mro-tek(config-eth/0/1)#
clear statistic
setup successfully!
Mro-tek(config-eth/0/1)#