The configuration of central site E1 interface of PINE-16M
4-4
Enable or disable the BER tester of the E1 interface
Command Description
config
Enter the global configuration mode
interface e1
<1-16>
To select a specific E1 interface at central site PINE-16M
bert
(enable|disable)
To enable or disable the BER test for the selected E1
interface.
show interface
Shows the configuration information of the intrface.
Example:
Mro-tek#
config
Mro-tek(config)#
interface e1
1
Mro-tek(config-e1/0/1)#
bert
enable
Set Successfully.
Mro-tek(config-e1/0/1)#
Configuring the interconnection mode of the E1 interface
Command Description
config
Enter the global configuration mode
interface e1
<1-16>
To select a specific E1 interface at central site PINE-
16M
inter-connection
(enable|disable)
To Enable / Disable the interconnection mode.
show interface
Shows the configuration information of the interface.
Example:
Mro-tek#
config
Mro-tek(config)#
interface e1 1
Mro-tek(config-e1/0/1)#
inter-connection
enable
Set Successfully
Mro-tek(config-e1/0/1)#
Summary of Contents for PINE-16M
