MR MSENSE VAM, Operating Instructions Manual

Page: 114 / 174

8 Operation
Maschinenfabrik Reinhausen GmbH 2021 114 6796573/02 EN MSENSE
®
VAM
8.7.11.4 Configuring IEC 60870-5-104 (optional)
If you want to use the IEC 60870-5-104 control system protocol, you must
set the following parameters. Also refer to the section Configuring the net-
work [
► Section 8.7.2, Page 97].
Figure 84: IEC 60870-5-104
1. Go to Settings > Parameters > System > IEC 60870-5-104 .
2. Select the desired parameter.
3. Set the parameter.
4. Press the Accept button to save the modified parameter.
TCP port
You can use this parameter to set the TCP port.
ASDU address
You can use this parameter to set the address of the ASDU.
ASDU sequence optimization
With this parameter, you can set which method is to be used for optimizing
the ASDU types. The standard enables optimization in order to be able to
transfer multiple value changes in a telegram in a sequence of ascending in-
formation object addresses. This is displayed by the sequence bit. The se-
lection of ASDU types for which this optimization is allowed is based on the
edition of the standard.