8 Operation
Maschinenfabrik Reinhausen GmbH 2021
102
6796573/02 EN
MSENSE
®
VAM
Linking digital outputs
When you link a digital output to an event, the device issues a signal to that
output if the event occurs. The signal persists until the event stops. A param-
eter is available for each available digital output.
Figure 78: Linking digital outputs
In order to establish the link, you have to enter the corresponding event
number in the desired parameter.
If you enter event number 500, the link is disabled.
To link the digital output, proceed as follows:
ü
The desired event number is known.
1. Go to
Settings > Parameters > Link outputs
.
2. Select the desired parameter.
3. Enter the desired event number.
4. Press the
Accept
button to save the modified parameter.
Summary of Contents for MSENSE VAM
Page 1: ...Monitoring system MSENSE VAM Operating Instructions 6796573 02 EN ...
Page 172: ......
Page 173: ......
