manualshive.com logo in svg

MR MSENSE VAM, Operating Instructions Manual

Share
Download
MR MSENSE VAM Operating Instructions Manual Download Page 70

7 Commissioning

Maschinenfabrik Reinhausen GmbH 2021

70

6796573/02 EN

MSENSE

®

 VAM

To set the parameters with the help of the commissioning wizard, proceed
as follows:

1. Log in as a user with the necessary access rights.

2. Go to 

Settings > Commissioning wizard

.

Figure 49: Calling up the commissioning wizard

3. Press the 

Next

 button to launch the commissioning wizard.

4. Follow the on-screen instructions.

Once you have entered all of the parameters relevant to commissioning,
continue with the function test.

7.3 Setting the language

You can use this parameter to set the display language for the device. The
device comes with a maximum of four languages. The following languages
are available:

English

Italian*

German

Portuguese*

French*

Russian*

Spanish*

Chinese*

Korean*

Polish*

*) Language is available as an option (upon request)

To set the language, proceed as follows:

1. Select the 

Language

 button in the status bar, or as an alternative go to

Settings > General > Language

.

Figure 50: Setting the language

2. Select the desired language from the list box.

Summary of Contents for MSENSE VAM















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands