MR MSENSE VAM, Operating Instructions Manual

Page: 116 / 174

8 Operation
Maschinenfabrik Reinhausen GmbH 2021 116 6796573/02 EN MSENSE
®
VAM
8.7.11.5 Configuring Modbus (optional)
If you want to use the Modbus control system protocol, you must set the cor-
responding parameters depending on the Modbus type selected. Also refer
to the section Configuring the network [
► Section 8.7.2, Page 97] if you want
to use Modbus TCP.
Figure 85: Modbus
1. Go to Settings > Parameters > System > Modbus .
2. Select the desired parameter.
3. Set the parameter.
4. Press the Accept button to save the modified parameter.
Modbus type
You can use this parameter to set the Modbus type. You can select the fol-
lowing options:
▪ RTU
▪ TCP
▪ ASCII
Modbus address
You can use this parameter to set the Modbus address.
TCP port
You can use this parameter to set the TCP port.
Maximum TCP connections
You can use this parameter to set the maximum number of TCP connec-
tions.