MR MSENSE VAM, Operating Instructions Manual

Page: 89 / 174

8 Operation
Maschinenfabrik Reinhausen GmbH 2021 89 6796573/02 EN MSENSE
®
VAM
Filter options
Using the drop-down menu, you can limit the selection of tap-change opera-
tions to those of a specific tap-change operation type or to those involving a
specific property.
▪ Selection according to tap-change operation type:
– Change-over selector operation
– Small, medium or large tap change
– Reverse tap-change operation
▪ Selection according to property:
– All
– Marked
– Evaluation ok
– Anomalies
– Without evaluation
Display of selected tap-change operations
To display individual tap-change operations with the associated VAM signal
and the stored limit value as a curve, proceed as follows:
1. Place a check mark in the first column in front of the tap-change op-
eration that is to be displayed as a curve. Up to 100 tap-change opera-
tions can be shown in the visualization via web browser. A maximum of 10
tap-change operations can be shown on the device display.
2. Confirm via the Display button.
ð They will be displayed differently depending on the number of selected
tap-change operations.
If more than one tap-change operation is selected, then the limit value curve
display will be omitted for clarity purposes:
Number of selected tap-change operations 1 2-100 >100
Display of VAM signal Yes Yes No
Display of limit value curve Yes No No