8 Operation
Maschinenfabrik Reinhausen GmbH 2021
97
6796573/02 EN
MSENSE
®
VAM
8.7.2 Configuring the network
You can configure the ETH 1 and ETH 2.2 network interfaces of the CPU as-
sembly in this menu item.
You can only set the parameters for ETH 1 if the device is equipped with the
optional control system connection via Ethernet (TCP/IP):
▪ IEC 61850
▪ IEC 60870-5-104
▪ Modbus (Modbus type TCP active)
▪ DNP3 (DNP3 transmission type TCP active)
You can only set the parameters for ETH 2.2 if the device is equipped with
the optional interface for visualization.
Figure 74: Network settings
1. Go to
Settings > Parameters > System > Network settings
.
2. Select the desired parameter.
3. Set the parameter.
4. Press the
Accept
button to save the modified parameter.
8.7.3 Time synchronization
You can set the the device time manually or automatically via an SNTP time
server. The device must be connected to an SNTP time server via Ethernet
for this purpose. You can set the following parameters:
▪ Time synchronization via SNTP
▪ Activate second time server (optional)
▪ SNTP time server (for the first and second SNTP time servers)
▪ Synchronization interval
▪ Time zone
Summary of Contents for MSENSE VAM
Page 1: ...Monitoring system MSENSE VAM Operating Instructions 6796573 02 EN ...
Page 172: ......
Page 173: ......