Motrona DS230 Series, Safety Manual

Page: 84 / 100

Ds230_03a_oi_e.doc / Jun-15 Page 84 / 100
8.3. Preparation before first start-up
Before first start-up

the unit must be in a perfect technical condition, properly installed and wired

the unit must be set to the unit-state “Programming Mode” by setting the DIL switch slider 3
“OFF”

the unit must be connected via the USB port to a PC / notebook or alternatively to an
optional BG320 programming- and display unit

the operator surface OS6.0 must be installed correctly and running on the PC

all Parameters must be set to correct values

Commissioning may only be performed by qualified personnel.

The machine / equipment must be protected from unauthorized persons, because
undefined states of the machine / plant can occur during the first start up procedure.

The machine must be securely mounted and ready to operate.
 The safety function of the unit cannot be guaranteed before the commissioning is
completed.