Motrona DS230 Series, Safety Manual

Page: 62 / 100

Ds230_03a_oi_e.doc / Jun-15 Page 62 / 100
„Preselect Menu“
No. Parameter Range Default
027 Preselect OUT1.H:
Upper switching point of output OUT1 [X2:1-2]
-500 000.0
-
500 000.0
(Hz)
(see basic
frequency,
Parameter 003)
10 000
028 Preselect OUT1.L:
Lower switching point of output OUT1 [X2:1-2]
20 000
029 Preselect OUT2.H:
Upper switching point of output OUT2 [X2:3-4]
30 000
030 Preselect OUT2.L:
Lower switching point of output OUT2 [X2:3-4]
40 000
031 Preselect OUT3.H:
Upper switching point of output OUT3 [X2:5-6]
50 000
032 Preselect OUT3.L:
Lower switching point of output OUT3 [X2:5-6]
60 000
033 Preselect OUT4.H:
Upper switching point of output OUT4 [X2:7-8]
70 000
034 Preselect OUT4.L:
Lower switching point of output OUT4 [X2:7-8]
80 000
035 Preselect REL1.H:
Upper switch-point of the relay output [X1:1-2]
1 000
036 Preselect REL1.L:
Lower switching point of the relay output [X1:1-2]
2 000
037 Reserved
038 Reserved

The upper switching point (index .H) is only active, if no error can be detected and if an
external signal is triggered to the control input according to chapter
7.4.7.

The operator has to assign the values to the switch-points correctly.
The “High” value must always be higher than the “Low” value.