Motrona DS230 Series, Safety Manual

Page: 46 / 100

Ds230_03a_oi_e.doc / Jun-15 Page 46 / 100
7. Start-Up the Unit
The following chapter describes the various options for setting and configuring the unit.
In order to put the unit into operation or to change settings and Parameters, the following measures
must be taken:

Connect the unit to a 18 … 30 VDC power supply source

Change the DIL switch slider 3 to its OFF position (unit-state: „Programming Mode“)

Connect the unit to the OS6.0 operator surface or alternatively to a BG230 programming- and
display unit.
 „Programming Mode“ (DIL switch) only for start-up
 Set all DIL switch sliders to „ON“ after start-up

Protect the DIL switch sliders after start-up (e. g. by covering with an adhesive tape)

Normal operation is only permitted when the yellow LED is permanently off

The safety function of the unit cannot be guaranteed before the commissioning is completed.