Motrona DS230 Series, Safety Manual

Page: 79 / 100

Ds230_03a_oi_e.doc / Jun-15 Page 79 / 100
8.2. Parametrization
In order to ensure proper functionality the parameters must be set appropriate values. The next two
chapters
8.2.1 and 8.2.2 will describe important parameters, which must be set or checked in each
case.
The parameters of the subsequent chapters must be set or checked only when the respective
outputs are used.
8.2.1. Basic Settings
The following parameters must be set or checked in each case. Important basic settings of the
device will be defined here. These parameters settings will also influence other parameters, the
device function and the error detection time.
No. Parameter Notice
000 Operational Mode
001 Sampling Time
002 Wait Time
003 F1-F2 Selection
010 Power-up Delay
016 Position Drift1
017 Phase Err Count1
023 Position Drift2
024 Phase Err Count2
056 Standstill Time
8.2.2. Sensor1 and Sensor 2 Settings (Divergence)
The following parameters must be set or checked in each case. Important adjustments to calibrate
both sensor frequencies (Sensor1 and Sensor2) are defined here. These parameters settings will
also influence other parameters, the device function and the error detection time.
No. Parameter Notice
004 Div. Switch %-f
005 Div. %-Value
006 Div. f-Value
007 Div. Calculation
008 Div. Filter
013 Direction1
014 Multiplier1
015 Divisor1
020 Direction2
021 Multiplier2
022 Divisor2