Motorola Solutions WiNG 5.2.6 Reference Manual Download Page 523

Page: 523 / 670

Statistics 12 - 21

4. The

Wireless Clients

screen displays the following:

12.2.6 Wireless LANs



RF Domain Statistics

The

Wireless LANs

screen displays the name, network identification and radio quality information for the WLANs

currently being utilized by RF Domain members.

To view wireless LAN statistics for RF Domain members:

1. Select the

Statistics

menu from the Web UI.

2. Select the

default

item from under the System node on the top, left-hand side, of the screen.

3. Select

Wireless LANs

from the RF Domain menu.

MAC Address

Displays the Hardware or

Media Access Control

(MAC) address of each listed

wireless client. This address is hard-coded at the factory and can not be
modified.

WLAN

Displays the name of the defined WLAN the wireless client is currently using
for its access point interoperation within the RF Domain.

Username

Displays the unique name of each client’s assigned user.

State

Displays the state of the wireless client, as whether it is associating with an
access point or not.

VLAN

Displays the VLAN ID the client’s connected access point has defined for
interoperation.

IP Address

Displays the current IP address for the wireless client.

Vendor

Displays the vendor (or manufacturer) of the wireless client.

RF Domain Name

Lists each client’s RF Domain membership as defined by its connected access
point.

Disassociate

Select a specific client MAC address and select the

Disassociate

button to

terminate this client’s connection and RF Domain membership.

Refresh

Select the

Refresh

button to update the statistics counters to their latest

values.

Summary of Contents for Solutions WiNG 5.2.6































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Solutions WiNG 5.2.6

Reviews:

Related manuals for Solutions WiNG 5.2.6

Brands by name

Popular brands

Motorola Solutions WiNG 5.2.6, Reference Manual

Search results

Summary of Contents for Solutions WiNG 5.2.6

Reviews:

Related manuals for Solutions WiNG 5.2.6

Brands by name

Popular brands