Motorola Solutions WiNG 5.2.6, Reference Manual, Page: 474 / 670

11 - 12 WiNG 5.2.6 Access Point System Reference Guide
6. Select the AP Image File tab to specify the model and network address information to the file used in the access
point upgrade operation.
Figure 11-7 AP Upgrade screen - AP Image File
7. Select the AP Image tab and refer to the following configuration parameters:
AP Image Type
Select the access point model to specify which model should be available
to upgrade. Upgrades can only be made to the same access point model. For
example, an AP-8132 firmware image cannot be used to upgrade an
AP-7131 model access point. For that reason, the drop-down menu will only
display the model deployed.
URL Enter a URL pointing to the location of the image file.
Advanced Select Advanced to list additional options for the image file location
including protocol, host and path. Additional options display based on the
selected protocol.
Protocol
Select the protocol to retrieve the image files. Available options include:
tftp - Select this option to specify a file location using Trivial File Transfer
Protocol. A port and IP address or hostname are required. A path is optional.
ftp - Select this option to specify a file location using File Transfer Protocol.
A port, IP address or hostname, username and password are required. A
path is optional.
sftp - Select this option to specify a file location using Secure File Transfer
Protocol. A port, IP address or hostname, username and password are
required. A path is optional.
http - Select this option to specify a file location using Hypertext Transfer
Protocol. A hostname or IP address is required. Port and path are optional.