Motorola Solutions WiNG 5.2.6 Reference Manual Download Page 550

Page: 550 / 670

12 - 48 WiNG 5.2.6 Access Point System Reference Guide

12.3.4.3 Pending Adoptions



Adoption

The

Pending Adoptions

screen displays a list of devices adopted to this access point or access points in the process

of adoption.

To view pending access point statistics:

1. Select the

Statistics

menu from the Web UI.

2. Select

System

from the navigation pane (on the left-hand side of the screen), expand the default node and select

an access point for statistical observation.

3. Expand the

Adoption

menu item.

4. Select

Adopted AP History

Figure 12-28

Access Point - Pending Adoptions screen

5. The

Adopted Devices

screen provides the following

MAC Address

Displays the MAC address of the device pending adoption.

Type

Displays the AP type (AP-6511, AP-6521, AP-6532, AP-7131, AP-7161 or
AP-8132).

IP Address

Displays the current IP Address of the device pending adoption.

VLAN

Displays the current VLAN used by the device pending adoption.

Reason

Displays the status as to why the device is still pending adoption and has not
yet successfully connect to this access point.

Discovery Option

Displays the discovery option code for each AP listed pending adoption.

Summary of Contents for Solutions WiNG 5.2.6































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Solutions WiNG 5.2.6

Reviews:

Brands by name

Popular brands

Motorola Solutions WiNG 5.2.6, Reference Manual

Search results

Summary of Contents for Solutions WiNG 5.2.6

Reviews:

Brands by name

Popular brands