Motorola Solutions WiNG 5.2.6 Reference Manual Download Page 530

Page: 530 / 670

12 - 28 WiNG 5.2.6 Access Point System Reference Guide

12.2.8 Mesh



RF Domain Statistics

To view

Mesh

statistics for RF Domain member access points and connected clients:

1. Select the

Statistics

menu from the Web UI.

2. Select the

default

item from under the System node on the top, left-hand side, of the screen.

3. Select

Mesh

Figure 12-15

RF Domain - Mesh screen

The RF Domain

Mesh

screen displays the following:

Client

Displays the configured hostname for each mesh client connected to a RF
Domain member access point.

Client Radio MAC

Displays the hardware encoded MAC address for each mesh client connected
to a RF Domain member access point.

Portal

Displays a numerical portal Index ID for the each mesh client connected to a
RF Domain member access point.

Portal Radio MAC

Displays the hardware encoded MAC address for each radio in the RF Domain
mesh network.

Connect Time

Displays the total connection time for each listed client in the RF Domain mesh
network.

Refresh

Select the

Refresh

button to update the statistics counters to their latest

values.

Summary of Contents for Solutions WiNG 5.2.6































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Solutions WiNG 5.2.6

Reviews:

Brands by name

Popular brands

Motorola Solutions WiNG 5.2.6, Reference Manual

Search results

Summary of Contents for Solutions WiNG 5.2.6

Reviews:

Brands by name

Popular brands