Motorola Solutions WiNG 5.2.6 Reference Manual Download Page 522

Page: 522 / 670

12 - 20 WiNG 5.2.6 Access Point System Reference Guide

12.2.5 Wireless Clients



RF Domain Statistics

The

Wireless Clients

screen displays device information for wireless clients connected to RF Domain member access

points. Review this content to determine whether a client should be removed from access point association within
the selected access point RF Domain.

To review a RF Domain’s connected wireless clients:

1. Select the

Statistics

menu from the Web UI.

2. Select the

default

item from under the System node on the top, left-hand side, of the screen.

3. Select

Wireless Clients

from the RF Domain menu.

Figure 12-10

RF Domain - Wireless Clients screen

Summary of Contents for Solutions WiNG 5.2.6































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Solutions WiNG 5.2.6

Reviews:

Motorola Solutions WiNG 5.2.6, Reference Manual, Page: 522 / 670

Search results

Summary of Contents for Solutions WiNG 5.2.6

Reviews: