Motorola Solutions WiNG 5.2.6, Reference Manual

Page: 458 / 670

10 - 4 WiNG 5.2.6 Access Point System Reference Guide
5. Select View Events from the upper, left-hand, side of the Fault Management browser.
Figure 10-2 Fault Management View Events screen
Use the View Events screen to track and troubleshoot events using source and severity levels defined in the
Configure events screen.
6. Refer to the following event parameters to assess nature and severity of the displayed event:
7. Select Clear All to clear the events displayed on this screen and begin a new data collection.
8. Select Event History from the upper, left-hand, side of the Fault Management browser.
Use the Event History screen to track events impacting either a selected device or those impacting the access
point’s default RF Domain.
Timestamp Displays the timestamp (time zone specific) when the event occurred.
Module Displays the module used to track the event. Events detected by other modules
are not tracked.
Message Displays error or status messages for each event listed.
Severity Displays the severity of the event as defined for tracking from the
Configuration screen. Severity options include:
All Severities – All events are displayed regardless of their severity
Critical – Only critical events are displayed
Error – Only errors are displayed
Warning – Only warnings are displayed
Informational – Only informational events are displayed
Source Displays the MAC address of the source device tracked by the selected
module.
Hostname Displays the Wing assigned hostname of the device tracked by the selected
module.