Motorola Solutions WiNG 5.2.6, Reference Manual

Page: 136 / 670

5 - 78 WiNG 5.2.6 Access Point System Reference Guide
7. Refer to the Events E-mail Notification field to define how system event notification e-mails are sent on behalf
of the access point profile.
8. Use the Persist Configuration Across Reloads option to define how the access point saves (in flash memory)
the configuration received from its connected Virtual Controller. Stored configurations can be made available to
the access point if the access point’s connected Virtual Controller were to be unreachable. Options include
Enabled, Disabled and Secure .
9. Select OK to save the changes made to the profile’s Management Settings. Select Reset to revert to the last
saved configuration.
10. Select Firmware from the Management menu.
SMTP Server Specify either the Hostname or IP Address of the outgoing SMTP server
where notification e-mails are originated.
Port of SMTP If a non-standard SMTP port is used on the outgoing SMTP server, select
this option and specify a port between 1 - 65,535 for the outgoing SMTP
server.
Sender E-mail Address Specify the e-mail address where notification e-mails are originated.
Username for SMTP
Server Specify the sender’s username on the outgoing SMTP server. Many SMTP
servers require users to authenticate with a username and password before
sending e-mail through the server.
Password for SMTP
Server Specify the sender’s username password on the outgoing SMTP server.
Many SMTP servers require users to authenticate with a username and
password before sending e-mail through the server.