Motorola Solutions WiNG 5.2.6 Reference Manual Download Page 601

Page: 601 / 670

Statistics 12 - 99

12.3.16.1 WIPS Client Blacklist



WIPS

This

Client Blacklist

displays blacklisted clients detected by this access point using WIPS. Blacklisted clients are not

allowed to associate to this access points.

To view the WIPS client blacklist for this access point:

1. Select the

Statistics

menu from the Web UI.

2. Select

System

from the navigation pane (on the left-hand side of the screen), expand the default node and select an

access point for statistical observation.

3. Select

WIPS

and expand the menu to reveal its sub menu items

4. Select

Client Blacklist

Figure 12-56

Access Point - WIPS Client Blacklist screen

The WIPS

Client Blacklist

screen displays the following:

Event Name

Displays the name of the intrusion event detected by this access point.

Blacklisted
Client

Displays the MAC address of the unauthorized device intruding this access
point’s radio coverage area.

Time Blacklisted

Displays the time when the client was blacklisted by this access point.

Total Time

Displays the time the unauthorized (now blacklisted) device remained in this
access point’s WLAN.

Time Left

Displays the time the blacklisted client remains on the list.

Refresh

Select the

Refresh

button to update the statistics counters to their latest

values.

Summary of Contents for Solutions WiNG 5.2.6































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Solutions WiNG 5.2.6

Reviews:

Related manuals for Solutions WiNG 5.2.6

Brands by name

Popular brands

Motorola Solutions WiNG 5.2.6, Reference Manual

Search results

Summary of Contents for Solutions WiNG 5.2.6

Reviews:

Related manuals for Solutions WiNG 5.2.6

Brands by name

Popular brands