Motorola Solutions WiNG 5.2.6, Reference Manual

Page: 178 / 670

5 - 120 WiNG 5.2.6 Access Point System Reference Guide
5.7 RF Domain Overrides
Use RF Domain Overrides to define settings overriding a target device’s original RF Domain configuration.
An RF Domain allows an administrator to assign configuration data to multiple access points (of the same model)
deployed in a common coverage area (floor, building or site). In such instances, there’s many configuration attributes
these devices share as their general client support roles are quite similar. However, device configurations may need
periodic refinement from their original RF Domain administered design. Unlike a RFS series controller, an access point
supports a single RF domain. An access point RF Domain cannot be used on a different model access point. For
example, an AP-8132 RF Domain override can only be applied to another AP-8132 model access point.
To define a device’s RF Domain override configuration:
1. Select the Configuration tab from the Web UI.
2. Select Devices from the Configuration tab.
3. Select Device Overrides .
4. Select a target device from the Device Browser in the lower, left-hand, side of the UI.
5. Select RF Domain Overrides .