Motorola Solutions WiNG 5.2.6 Reference Manual Download Page 475

Page: 475 / 670

Operations 11 - 13

8. When the AP Image Type and appropriate file location and protocol have been specified, select the

Load Image

button to load all available images to the

Type

and

Version

table.

The table now displays available images and their corresponding versions.

9. Select the

Status

tab to review an Upgrade History of access point upgrade operations.

Figure 11-8

AP Upgrade screen - Status

10.Refer to the following to assess devices impacted by upgrade operations and their upgrade status:

Type

Displays the type access point upgraded.

MAC

Displays the primary MAC (or hardware identifier) for each device
impacted by an upgrade operation.

State

Displays the current upgrade status for each listed access point. Possible
states include:

• Waiting
• Downloading
• Updating Scheduled
• Reboot
• Rebooting Done
• Cancelled
• Done
• No Reboot

Progress

Displays the current progress of each access point undergoing an upgrade.

Retries

Displays the number of retries, if any, during the upgrade. If this number is
more than a few, the upgrade configuration should be revisited.

Summary of Contents for Solutions WiNG 5.2.6































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Solutions WiNG 5.2.6

Reviews:

Related manuals for Solutions WiNG 5.2.6

Brands by name

Popular brands

Motorola Solutions WiNG 5.2.6, Reference Manual

Search results

Summary of Contents for Solutions WiNG 5.2.6

Reviews:

Related manuals for Solutions WiNG 5.2.6

Brands by name

Popular brands