manualshive.com logo in svg

Motorola Solutions WiNG 5.2.6, Reference Manual, Page: 575 / 670

Share
Download
Motorola Solutions WiNG 5.2.6 Reference Manual Download Page 575

Statistics 12 - 73

Figure 12-42

Access Point Network - Bridge Details screen

5. The Details screen’s

Integrated Gateway Server (IGS)

table displays the following:

6. The Details screen’s

Multicast Router (MRouter)

table describes the following:

VLAN

Displays the VLAN where the multicast transmission is conducted.

Group Address

Displays the Multicast Group ID supporting the statistics displayed. This
group ID is the multicast address hosts are listening to.

Port Members

Displays the ports on which multicast clients have been discovered by the
access point.

Displays the interface name. For example, ge1, radio 1, etc.

Version

Displays the IGMP version in use.

Learn Mode

Displays the learning mode used by the router. Either

Static

or

PIM-DVMRP

.

Port Members

Displays the ports on which multicast clients have been discovered by the
access point.

Query Interval

Displays the periodic IGMP query interval value.

Version

Displays the IGMP version in use.

VLAN

Displays the VLAN on which the multicast transmission is conducted.

Summary of Contents for Solutions WiNG 5.2.6































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments